Six Face – Andrew Crowell

This week, I have Six Face – designed by Andrew Crowell and crafted by Brian Menold over at Wood Wonders. I’m very happy to have picked this up as it looks very similar to Six Rings, which was awesome, so I’m hoping this one is just as fun.

First off, this puzzle is an absolute beauty. There were 3 different wood combinations available when these were first listed and I quickly ordered the East Indian Rosewood, Ebarria and Koa variety and I am more than pleased with how it looks in person. Not only does this puzzle look great, but the fit and finish are spot on and it is a joy to manipulate.

The initial move is well hidden and it takes a lot of experimental pushing and pulling on various pieces to find it. When I finally found it, I was a bit shocked. 3 little moves and a big ole chunk of the puzzle comes right out! Usually, there is a lot more manipulating necessary to release that first piece, but not with this design.

The first big chunk has been removed. It gets harder from here.

Also interesting is the fact that soon after that first chunk is removed, I have 3 separate smaller pieces to manipulate. They are seemingly trapped as I can’t remove them, but they do have some limited movement, back and forth, up and down. I play with these movements for a while and soon realize that there must be more going on. So, I try a couple of new things and discover that 2 of these pieces can sort of do-si-so around each other which allows the 3rd piece to move to a new location. All this then allows a big chunk to slide up and one of the smaller pieces can then be removed.

About to remove the first small piece

Its quite a sequence to get this far and these are very cool and clever movements that feel unique and exciting. I’m not sure how Andrew does it, but all his puzzles seem to have this same quality to them.

The next set of moves took me a while to figure out. There are now 2 “free” smaller pieces that can move within the puzzle and there’s the bigger chunk that can still move up and down, but for the life of me, I couldn’t figure out how to unlock any of them. I discovered that one of the pieces could be rotated, but that didn’t seem to help much. Eventually, I had my epiphany and figured out a delightful sequence of 8 moves with one rotation that allowed one of the smaller pieces to be removed. Once again these clever movements had me smiling to myself in astonishment!

With only 3 pieces left it should have been easy at this point, but I was overthinking things and struggled for a bit to remove that final tiny piece. It was actually a lot more straightforward than I was making it out to be and once I took a closer look at the puzzle, I was able to pull that final tiny piece out.

At this point all that was left was two intertwined “bigger” chunks and they come apart easily – though it does involve another rotation and is wonderfully marvelous how they fit together.

All the pieces have been disassembled. Beautiful wood and an excellent design.

This puzzle has the same joy of discovery as 6 rings did. There’s something magical about holding a puzzle for the first time – knowing that it can be unlocked with knowledge – and knowing that with enough persistence, I can gain that knowledge. For me it’s like holding an unread book. There is excitement and anticipation and a crackling of energy in the air and this puzzle did not disapoint.

Some puzzles excite me and some feel tedious. I suppose I like Andrew’s puzzles because I can solve them, yet they provide a good amount of challenge. They are never frustrating and when I finally figure out the moves, I greatly enjoy basking in the dreamy glow of accomplishment. Overall, a great design, fantastic craftsmanship and joyous moves make this one of my favorites.

giganTIC – Andrew Crowell

Today, I visit giganTIC designed by Andrew Crowell and wonderfully crafted by Brian Manold over at Wood Wonders Online. I have bought a number of puzzles from Brian recently, but most of them remain unsolved including Perfect 11, I&i, Jitter Soma and Inelegant Cube. Hopefully, I’ll have time in the next few weeks to get to those. But, in the meantime, I have spent the last couple of nights getting to know giganTIC.

The beautifully crafted giganTIC puzzle designed by Andrew Crowell

This is a fantastic puzzle. Despite it’s name, its a little smaller than a typical 4×4 cube. But perhaps it’s the number of moves required that encouraged its name. At 10.10, this is a moderately difficult puzzle that is extremely fun to explore and understand.

The puzzle itself is incredibly beautiful. The selection of exotic woods really makes this one special. I have spent a lot of time holding the individual pieces are marveling at the wood grains. Two pieces in particular are especially nice – the lacewood section with its very conspicuous flecking and the dark brown wood that contains streaks of light brown (sorry don’t know the name of this wood!).

Solving this puzzle is a joy. As with most of these Crowell design TICs, the first move is fairly well hidden and requires pushing and pulling pieces as you spin the cube around. Eventually, the first move is found and soon thereafter is the first rotation. There are a couple of dead ends possibilities, but the path to the solution is mostly straightforward.

The first piece has moved which starts to unlock the mysteries contained within.

I spent bit of time wandering in circles somewhere around the 7-8th move. I couldn’t quite figure out what was next. It was then that I re-read the description and saw that this was a 10.10 solution puzzle. This narrowed down my options as I knew that the 10th move had to remove a piece.

On a side note – I wonder if puzzles descriptions should include the number of moves required to solve it. Isn’t it a bit of a spoiler to know ahead of time how many moves are required? I often use this information as another clue to help me solve the puzzle, but I wonder if I am robing myself of some of experience by utilizing this knowledge? If I didn’t know that this was a 10.10 puzzle, how would that have changed the experience?

The first piece has been removed from the puzzle, only 10 more moves to go!

Anyway, back to the puzzle – After the first pieces is removed, I was again stuck. I continued to cycle through all the known moves – I would return the puzzle back to the start – minus the one piece, and then would work forward again to the spot where I removed the piece and would hit the dead end. There didn’t seem to be any other options. But then, like any decent puzzler, I forced myself to try other options and soon enough found a new path forward.

The new path quickly revealed the answer and with a final rotation, the puzzle separated into two halves. Wow, this thing is really cool!

Puzzle has been disassembled! The wood used in this puzzle is just beautiful.

Overall, The puzzle is kind of split into two separate sets of movement. The first 10 moves remove a cornerstone piece and then the next 10 moves separates the puzzle into two halves and the rest is trivial from there. The moves are really quite unique though, with a number or rotations mixed in as well as other hidden moves that are exciting to find.

It’s hard to imagine that so many mysteries could be hidden in 64 voxel cube. It seems like there should be a finite amount of interesting puzzling options – and I’m sure there are, but to my mind, there are many more options than would seem possible. Andrew seems to have a knack for designing these really creative puzzles that are full of unique and interesting moves. Each step along the way is delightful and satisfying and I can’t wait for more.


Six Rings #2 – Andrew Crowell

Today, I’m looking at a puzzle designed by Andrew Crowell and built by Brian Manold at Woodwonders. This is my first purchase from Brian, but it definitely won’t be my last. In fact, I’m having a hard time not pulling the trigger on the Perfect 11 and Evolution II puzzles still available on his site. Where does one draw the line when it comes to purchasing puzzles?

I was attracted to the description of this puzzle – “I learned that Andrew had written his own program to design his puzzles. He was able to come up with some very creative rotations in this way.” Creative rotations sound fun and a custom program to design puzzles? Color me intrigued!

Anyway, the puzzle arrived quickly along with a couple of other ones I had ordered, and Brian even threw in a free gift puzzle since I was a first time customer. Awesome! (I’m still working on the gift puzzle..) And my first impression of these puzzles – They smell great! No, seriously, these puzzles have a unique smell and I can’t get enough. There must be a light stain or oil on the wood, and as weird as it may sound, I was delighted to rip open the shrink wrap and awaken my olfactory senses. In my mind, I was transported to the workshop and could feel the fine craftsmanship oozing from the mix of woods.

Ok, ok, enough of how the puzzles smell. How do they solve? Well, this is one interesting puzzle. It really has some fun moves and the shapes are so unusual that it presents a nice challenge.

I spent the first 5 minutes just trying to get something to move. The puzzle felt solid and tight and no matter how I tried to pull, push and twist, I couldn’t get anything to budge. This made me happy, clearly there was something going on that I hadn’t figured out yet. The puzzle required me to focus, to concentrate, this wasn’t going to be an easy stroll through the park.

Where to begin? Push and Pull as I might, the cube didn’t budge.

After a few more minutes of play, I found the opening move and shortly after that I discovered the first rotation. Wow, this is a really fun move that I had to repeat over and over because it was just so well executed.

Finally, I was ready to move on and solve this thing. But alas, I was stuck. Surely I had the opening moves correct, but I wasn’t sure about the 5th move. There was a small “trapped” piece on the inside of the cube and I spent a good amount of time manipulating that piece. It could rotate a few different ways and there were several pockets it could be moved into. However, none of these options seemed to release any pieces.

It only takes a few moves to turn this symmetrical cube into a lopsided monstrosity.

I re-assembled the puzzle and started again. I wasn’t in a hurry to solve it because the opening moves were fun to execute, but eventually, I had to move on, so I tried something different and finally discovered how to unlock the first piece. The trapped piece came out next and I was left with only 3 pieces.

I don’t want to spoil anything, but the way these 3 larger pieces interlock is really quite beautiful. It isn’t particularly difficult to get them apart – In fact the pieces are so unique that there aren’t that many options for them to move, but it is very satisfying and even a little surprising how they interact.

What happened to the cube!

The first time I re-assembled the puzzle I was a little intimidated. I didn’t spend much time memorizing positions or anything, I just figured I could get it back together – and I was right, it’s not too difficult, a little perseverance will do the trick. But, it sure was fun.

This is a very enjoyable puzzle that had enough surprises to keep me interested and was difficult enough to keep me engaged. There is one rotation in particular that is very enjoyable and made me feel like Indiana Jones pulling the lever on some ancient treasure. I think the tolerances, build quality and design all work together to really make this puzzle shine. I look forward to purchasing many more puzzles from Andrew and Brian both.

The Puzzle is disassembled. Take a look at those funky pieces!