Sloot 3 – Alfons Eyckmans

Ah, Sloot 3, a November 2019 release from Cubicdissection.com that didn’t seem to garner much attention. Perhaps this puzzle was overshadowed by many of the other amazing puzzles released last November – Split Maze Burr, Escalating Box, Small Box #3 & #4 come to mind.

I’m guilty of overlooking this one as well. Sometimes I order too many puzzles, can’t get to them all and so they end up in my “box of unsolved” puzzles. This one suffered such a fate. While my attention was on the small box series, this one collected dust and went forgotten. But, today is a new day and I’m feeling motivated to knock it out.

Look at that Purdy, Purdy puzzle.

Sloot 3 is a very cool puzzle. It looks like a typical 6 piece board burr puzzle, but closer inspection reveals hidden complexities. The edges of the burr pieces have these outer slots into which tabs on the inner side of the boards fit. This restricts movement and adds an extra element that must be considered when disassembling this puzzle.

Maybe the coolest part of all this is that these outer slots are NOT simply routed into the wood. Eric has crafted these channels out of solid wood. It’s a subtle detail, but a very impressive one that really makes this puzzle stand out. It’s exactly these types of details that separates Cubic Dissection puzzles from the pack. The extra attention surely cost more time and material, but the result is worth it and why I choose to spend the extra money.

Attempt at a detail shot of the tabs and slots

So, I’ve been playing with this puzzle for the past couple of days. I think I am close to getting the first piece out, but I am currently stuck at a dead end. It’s a fun puzzle to manipulate. The channels and tabs prevent obvious movements thus a more calculated approach is required. The channels also keep this puzzle locked in tight. There’s no wiggle room.

A typical configuration during the solve. I was stuck in this area for many hours before I found “the move”

After several hours, I eventually escaped the repeating dead-end maze-loop and found an excellent hidden move. Bah! how did I miss that! What a cool puzzle! This little move opened up a whole bunch of other options and now I know that I’m getting close.

After a bit more manipulation I see how I can remove the first piece. Yes! fantastic! I remove the first piece and it’s not over yet. The puzzle doesn’t just fall apart. There’s still some calculated moves required to get out piece #2. But, it’s not too difficult and soon enough I have the whole puzzle apart! Awesomeness. Man it feels good to solve a puzzle!

Puzzle Solved! Yay that was fun!

Ok, the assembly. Truth be told, I took some photos of the final moves, so I used those as a guide to put things back together. I don’t know if I have the ability to do the assembly without help. It certainly would have taken a long, long time, and, well, I have more puzzles to do, so there it is.

Another shot of the disassembled puzzle. Look at all those tabs!

Overall a very fun puzzle that I found to be rather approachable despite it’s difficulty rating (16.6.4) Highly recommended if you can find a copy.

2 thoughts on “Sloot 3 – Alfons Eyckmans”

  1. Nice write-up – I, too, had forgotten this one.

    I’m confused by “these outer slots are NOT simply routed into the wood. Eric has crafted these channels out of solid wood” – what distinction are you making here?

    1. I was attempting to compare this puzzle to something like the grooved 6 board burr puzzles from juno. Juno uses a router to cut the channels whereas Eric doesnt use a router. He builds the channels with wood sticks. Does that make any sense?

Comments are closed.