Burr – Puzzle Pusher

Wing Hangar – Osanori Yamamoto

Today, I have the fabulous “Wing Hangar” from Osanori Yamamoto. This is another piece produced recently by Jakub over at Pelikan Puzzles. It’s a wonderful puzzle with only 3 pieces, but don’t be deceived, it’s a bit tricky. As with all Pelikan puzzles, this piece is a work of art and it is a joy to play with.

The puzzle consists of Mahogany outer box and two (in my case) Wenge Burr pieces, But Tthe puzzle also came in a Mahogany/Purpleheart variation. I’m a sucker for Wenge, and thus am very happy with the variant that I chose.

My thoughts while initially playing with the puzzler were as follows:

“Ok, so I’ve been playing with this puzzle for about an hour and I haven’t gotten anywhere. I thought this one was going to be easy. There’s only 2 pieces, there can’t possibly be that many options, yet here I sit, unable to get the 2 pieces into the box.”

Burr piece slots nicely into the roof of the box but there just isn’t enough room!

This puzzle gave me some trouble to begin with.

“I think they made a good call sending this one out unassembled – it is proving to be a good challenge. The difficulty lies in not knowing the orientation of the pieces – and the pictures on the Pelikan website don’t help. If I don’t have the orientation correct, then I’m spending time working on an impossible solution. Up to this point I haven’t gotten systematic with it yet either.”

This puzzle took me an embarrassingly long amount of time to put together. I didn’t clock it, but I definitely worked on this for numerous hours over numerous days. And once I solved it, I put it on the shelf and moved on to another. It was many days later that I finally returned to Wing Hangar.

When I finally did return, I found that now, I couldn’t disassemble it. What the heck? I had put it together, surely I could now remove the pieces. I tried over and over and just when I thought I was making progress, I’d realize that I just completed a loop and was back where I started. Frustrated, I put the puzzle back on the shelf for another day.

Today, I had a little time and a little more focus and decided once and for all to conquer this puzzle. And sure enough, not 20 minutes later, I had the pieces out and not only that, I had an understanding of how it works. I took some pictures and then was able to quickly assemble the puzzle again. Now I’m left wondering why the heck this one took me so long to solve and understand.

The pieces are out! This is how this puzzle is shipped.

It’s interesting to me because I’ve experienced varying degrees of success when solving puzzles and I largely attribute my performance to my mental state at the time. Sometimes, I’m just in the zone and all my focus is on the puzzle and I seem to do well in those moments, but other times, I just can’t seem to get anywhere. Clearly I need time and space to perform my best because if there are distractions, or a looming obligation, then I don’t seem to have the required focus.

Also, solving puzzles can be mentally exhausting and I don’t always feel like putting myself through the mental anguish. A lot of nights, I do have the time, but I don’t have the focus. Either way, I’m going to continue to solve puzzles when “the time is right” and try not to force anything. I don’t want this hobby to become a job.

Two Face 3 – Alfons Eyckmans

This week, I have another fantastic burr puzzle created by Eric Fuller and designed by Alfons Eyckmans. This one is called Two Face 3 and is one special puzzle – I’m still reeling from having just completed it.

To begin with, this puzzle is a beautiful work of art. Its visual appearance is stunning – the construction is superb and the choice of woods really elevates the whole design. It’s a 6 piece burr, but unique in that there are two outer cages that can move independently of each other. The inner cage has a few strategically placed cubes and cutouts that combine to make this not only a difficult puzzle, but also a very clever one. The construction of the cages is incredibly sturdy and they fit together very tightly making for a very solid feeling puzzle.

Beautiful construction and and high difficulty make this puzzle shine

The overall design is very clever. The use of two cages is not just for looks either, it factors into the solution.

This was another intimidating puzzle for me. It sat on the shelf for a couple of weeks before I started to tinker with it, and then it was another week until I really decided to put some effort into it. Whether it’s intimidation or a desire to relish the puzzle as long as possible, I find that sometimes, I’m just content to let it sit. Maybe I don’t want the experience to be over, so I procrastinate a bit, I let the puzzle breath like a fine wine, until that perfect moment arrives and then I sit down with a job to do.

And so, I finally sat down with this one last week and began to seriously work on it. I began exploring different moves and discovered some typical burr-type moves, but didn’t make any real progress. I kept going in circles, with no real progress made.

I spent a number of sessions doing this. Moving pieces, feeling like progress was made only to find myself back at the beginning. Early sessions like this are enjoyable to me – I don’t really want to solve it quickly, I just want to enjoy the experience for a while and Two Face 3 really delivered the goods. But, that said, after a certain number of sessions, i start to feel like I need to make some more progress – so, I increase my focus and start trying abnormal moves.

This yielded some success for me as I discovered an interesting placement for one of the pieces. Surely I was on to something here! But, even with this new discovery, I couldn’t make any progress. I was able to revert back to the beginning position and then repeat the move, but it still didn’t yield any solution.

After a few more sessions, I discovered a similar move at another location and then knew I was making progress. But, to my dismay, the solution still wasn’t there. Man, this puzzle really takes some work! I spent another day working various moves but couldn’t make progress. I had to be on the right track didn’t I?

Well, one morning, I took the half-solved puzzle to work with me and sat there fiddling with the pieces when suddenly, one fell out! Holy crap! I didn’t expect that, but apparently I had done the right thing and was rewarded. I spent the next 15 minutes carefully removing the remaining pieces and then bathed in glory as I examined all the pieces and marveled at the craftsmanship.

Then, fear set in. I went from joyful elation to fear. I was so happy to have solved the puzzle that I forgot to pay attention to the orientation and position of the 2 cages and the burr pieces. I didn’t really think about the fact that the 2 cages could be put together in 8 different ways… and if they weren’t put together correctly, then there’s no way the burr pieces would fit… How on earth was I going to get this thing back together…?

All the pieces have been removed! Halfway there!

Well, the good news was I had taken various photos while tinkering with the puzzle. So, I went back and took a look at those photos and was able to deduce the orientation and placement of the 2 cages – phew – crisis averted. Although, that would have made one heck of a challenge – to start with this puzzle completely disassembled and go from there. Maybe one day..

Anyway, even though I had the orientation of the cages documented, I still didn’t know how to reassemble this thing. I did keep track of the order in which I removed the burr pieces, and that would prove helpful, but it wouldn’t move the puzzle for me.

In the end it took me at least another 3 hours to put it back together. It’s a tricky puzzle and requires a very specific sequence to solve it. Interestingly, I employed a rotation to put it back together – I’m not convinced that it was entirely necessary, but at a certain point, rotating the burr piece allowed another piece to move where I wanted it and then I rotated the original piece back. Again, not sure if it was necessary, but I remember playing with a rotation when disassembling too, so perhaps it is required.

This may be the most difficult burr puzzle I’ve ever solved and I thoroughly enjoyed it. I’m not eager to solve it again anytime soon, but I do think I will revisit it one day and see if I can get a better handle on how it works. Highly recommended if you enjoy this type of puzzle – and there are even some left at cubicdissection.com

Wourie – Alfons Eyckmans

I am excited about this one – “Wourie” is a puzzle designed by Alfons Eyckmans and built by Pelikan Puzzles out of the Czech Republic. This piece was part of my first ever order from Pelikan and I have to say, I am extremely impressed with the workmanship of their puzzles. There will be many more posts in the future taking a close look at additional offerings from Pelikan

But today, I’m focused on Wourie. Oh, what an exquisite puzzle it is! The woodwork really is superb. It just feels nice to hold and play with. The puzzle came in two different wood variations – Mahogany or cherry. I chose the Cherry option and I’m very happy with the appearance.

Solving this puzzle takes a bit of work and a bit of time. I decided to take this one slow – I really wanted to enjoy every moment of discovery with this piece and what a fun journey it was!

At first this puzzle seems limited in the possible moves. A piece moves up, a piece moves down, but there doesn’t seem to be any progression. After a few deadends, I discovered a new direction that I hadn’t tried before and sure enough, this led to the solution. I was so excited that I had figured it out that I completely ignored the position of the pieces and the final move – and then it was too late, the pieces were unlocked and scrambled on my desk and I could not remember which order they were in.

A beautiful puzzle disassembled – getting this together again is no easy task!

Well, the description of this puzzle says that “reassembly is a real challenge if you scramble the pieces and leave them a while” and I would have to strongly agree with that assessment. I didn’t leave the pieces a while, but they were scrambled up good so I was left with starting the reassembly from scratch.

Reassembly took me a good 2-3 hours and it is really tricky to figure out. I knew right away which order the pegs go in, after all, I could see the picture on the Pelican site, but I didn’t know what orientation those pegs should go in and I also didn’t know what order or orientation the plates belonged.

So, it was lots of trial and error – many positions could be easily eliminated as possibilities, but there were still lots of potential options available to test out. Fairly early on in the process, I was feeling pretty confident about which pieces belonged where – from that point, it was just a matter of figuring out how to assemble the pieces.

I remembered from solving the puzzle that the natural colored peg came out first, so that gave me some clue as to how to reassemble, but it was still a long while before I finally got it figured out. I kept banging my head on the wall trying the same thing over and over, and of course it didn’t work – over and over. I finally stepped out of my own box and tried something a little different and just like that, it was back together.

Once back together, I slowly solved it again – this time paying attention to the moves – especially the final move (which is devilishly clever if you ask me.) In total, I counted 12 moves necessary to release the first piece and likewise 12 moves to put it back together once pieces are in correct position.

Overall, I love this puzzle. I think its a brilliant design with amazing fit and finish. It kept me highly engaged for many hours. I would highly recommend this puzzle to anyone (if you can get one!) It would look great on a desk or shelf and I can’t wait to share this with friends and family!

Funzzle – Gamma

Ahh, another Funzzle puzzle. This time, its the Gamma. This one looks fairly complex and difficult. Let’s see if I can get it opened.

The first thing I notice is that this puzzle is pretty loose. It doesn’t fall apart, but it does feel like it might fall apart if you hold it wrong. A number of pieces slide back and forth and it seems like there will be a lot of combinations to work through here.

I took the initial, disassembly phase, really slowly. I know I have to put it back together, so I want to pay close attention to what I’m doing. I didn’t want to just wiggle out pieces, I wanted to get the specific moves memorized and accounted for, so that I could reverse things.

With that disclaimer in place, I’ll admit that getting the first piece out took me a while – maybe close to an hour total. There were a few different sequences I tried, but they were all dead ends, then I finally found a sequence that seemed like it would work. At this point, I worked the sequence forward and back a number of times until I felt that I had it memorized. It takes 6-7 moves to remove the first piece.

Once I had the first piece removed, it was easy – or so I thought… Actually, it took me another 15 minutes to remove the second piece. Again, I felt that I could just rattle the puzzle around and eventually the next piece would fall out, but I wanted to be sure I was being systematic, so I returned the puzzle back to the starting point – minus one piece, and then worked out the moves to remove the second piece.

Once the second piece was removed, the rest were relatively easy to remove. Once I got down to the final 3-4 pieces, I again focused in on how they were connected. I wanted the best chance to reassemble this, so was trying to really focus and remember these crucial steps.

Once I had it apart, I quickly celebrated and then started reassembly. Thing went pretty smooth. The initial construction – putting the 3 white pieces together was a little trickier than I thought it would be, but once those three were correct, it was fairly simple to add the next 4 brown pieces – and thats where things got tricky.

The second to last piece just didn’t want to go. I had everything lined up correctly, I think, but there didn’t seem to be any room. After a bit of head banging, I shifted some things around and it opened up for me. Adding the final piece was actually easy because I had practiced that move so many times that I had it memorized.

Overall, this was a fun puzzle. It is apparently a knock-off of a Stephane Chomine design – I’d love to check out the original – and in fact, I did find a breakdown of the original design here. Its hard to tell, but I don’t see many (if any) difference between the two which would lead me to thinking this is a straight up copy of Chomine’s work, but I could be wrong on this.

Funzzle Epsilon

I’ve had the Funzzle Epsilon sitting in a box for a few weeks and last night I decided to give it a go. I don’t have a ton of experience with Burr puzzles, But, I enjoyed the Funzzle Beta, so lets see how this one goes.

Like the other funzzle puzzles this one is made of bamboo. I don’t mind the bamboo – it feels a little cheap, but having some good inexpensive puzzles available is a good thing – I can always buy a pricier Burr if I want.

Anyway, the first 15 minutes with this puzzle was a bit frustrating. One piece falls out immediately, which inspires confidence, but it is quickly dissolved by the roadblock ahead. I fiddled and fiddled with it and came away with only a few possible moves. I couldn’t seem to find any way to free up any more pieces, everything was locked into place regardless of the combinations I chose. So, I put it down.

Later on I returned with renewed focus – once again, I challenged myself to start trying new things, even if they didn’t seem likely. As per usual, this little challenge helped me get the next move. It seems that a rotation is necessary to free up the next piece. After this rotation, I then had many options for movement. It was at this point that I began to fear putting it back together. It started feeling really complicated as to what pieces were moving – As the puzzle gets looser, it becomes harder to keep track of the movements. So, I put it back together, numbered the pieces, slowed down and started taking notes.

I was able to get back to the earlier position and then very carefully moved pieces and kept track of what I was doing. The goal was to figure out how it worked so that I could put it back together – is this cheating? I don’t know what other people think, but I don’t consider it cheating. I’m speeding up the process at which I figure the puzzle out – it seems efficient, but not rule breaking.

Funzzle Epsilon ready to solve — Ready to start pulling pieces out, notes in the background.

A few moves later and I was able to free up all the pieces. As usual, the feeling of solving a puzzle is fantastic and this was no let down. Once the pieces were removed, I breathed a sigh of relief and then assembled it back together. Assembly was pretty easy due to the fact that I had the pieces numbered, I had notes, and also pictures of the near-final state. Maybe the next challenge will be to erase all marks, put away the notes and camera and see how well I do without any aids…

Funzzle Epsilon Solved — The pieces have been removed. You can see my labels on the puzzle.

Overall, I enjoyed this puzzle and I think I may purchase more burr types in the future because they are pretty fun to work out.